TIMBER PRODUCTS COMPANY

Timber Products has decided to discontinue their sawmill operation in Munising, MI.
Onsite & Online

AUCTION!

Onsite & Online
Timber Products Company
E11256 M-28 | Munising, MI 49869
Saturday, December 5th, 2026

9AM Eastern

 

Auction is being conducted in conjunction with Associated Auction & Liquidation Co.

 

Timber Products Has Decided To Discontinue Their Sawmill Operation In Munising, MI. They Will Continue Their Veneer And Components Operations In Munising Plus All Of Their Other Operations Throughout The USA. This Is A Very Large Auction With Lots Of Parts And Misc Items Too Numerous To Mention.

 

Directions: From Munising, MI. Take M-28 East 6 Miles, Then North ¾ Mile.

 

Inspection By Appointment Only Monday, November 23rd - Friday, Dec 4th from 8AM-4PM. Questions On Equipment Or To Schedule An Inspection Appointment Contact        Nick LaFord @ (906) 202-2933.

______________________________________________________________________________________________________________________

 

RING DEBARKER

2015 Nicholson A6 RH Chain Feed 35” Ring Debarker, SN: N7674

2015 Mellott 30” x 19 ½’ Log Infeed Hour Glass Roll Case w/Log Kicker, Reversing Hydraulic Drive

30”x 17 ½’ Log Hour Glass Roll Case (Out Of Debarker), Reversing Electric Drive

5’x 5’ Debarker Control Cab W/AC.

11’ 5-Strand HD Log Infeed Deck W/HD Drive.

30”x 32’ Log Hour Glass Roll Case W/Electric Drive.

14’x 40’ 4-Strand HD Log Deck W/Hydraulic Stop and Load, Electric Drive.

Approximately 80’ of W.D. 110 Chain Bark Conveyor W/Steel Pan & Electric Drive.

16”x 22’ Barn Sweep Bark Conveyor in Steel Chute (Counter Clockwise).

12”x 20’ WD 110 Chain Log Conveyor W/ Reversing Electric Drive.

Approximately 95’ Sharp Bull Chain Lug Log Conveyor W/Electric Drive (Into Mill).

 

2-CLEEREMAN LINEAR POSITION CARRIAGES

Mill #1

Cleereman LP42 Right Hand Carriage, 3 Block, SN: 42-746-01.

Cleereman HYD 100 100HP Carriage Drive, SN: 105-98.

USNR G3 Yield Master Stereo Scan 3-D Log Scanner.

Pneumatic Cant Catcher.

30”x 11 ½’ Drop Belt Slab Conveyor.

Cleereman Hydraulic Log Turner.

Hydra-Tech HP80L 30 HP PAVC 65 30HP Electric/Hydraulic Power Unit.

Cleereman 54”x 12’ Fully Insulated Sawyers Cab.

9’x 15’ 3-Strand HD Log Infeed Deck W/Hydraulic Stop and Load, Reversing Electric Drive.

Salem 40HP Electric/Hydraulic Power Unit (Runs Log Turner), Stop and Load.

Mill #2

Cleereman LPC42 Lefthand 3-Block Carriage, SN: 42-434-93.

Cleereman HYD 100 100 HP Carriage Drive, SN: 054-93.

Inavec Stereo G3 Yieldmaster Scan 3D Log Scanner.

Pneumatic Cant Catcher.

30’x 11 ½’ Drop Belt Slab Conveyor.

Cleereman Log Turner.

Hydra-Tech HP80 L 30HP PAVC65 30 HP Electric/Hydraulic Power Unit.

Cleereman 54”x 12’ Fully Insulated Sawyer Booth.

9’x 15’ 3-Strand HD Log Infeed Deck W/Hydraulic Stop and Load, Reversing Electric Drive.

Salem 40HP Electric/Hydraulic Power Unit (Runs Log Turner), Stop And Load.

 

2-FILER & STOWEL 8’ BAND HEAD RIGS

1-Left & 1-Right Hand W/ 150HP Electric Motors.

 

SALEM 6’ HORIZONTAL BAND RESAW & RUNAROUND

Salem 6’ Right Hand Horizontal Band Resaw W/ 125 HP Motor, Complete Saw Guide Lube System, SN: 87-4949.

30”x 15’ Cant Infeed Roll Case W/ Cant Positioners, 12’x 11 ½’ 3-Strand Transfer Deck & 3’ 4-Strand Jump Transfer W/Pin Stops.

30”x 20’ Power Roll Case Outfeed W/ Cant Kickoffs.

Mellott Chain Type Cant Turner/ Positioner.

Mellott Complete Runaround System Including Decks, Rollcases & Belt Conveyor.

 

TMT OPTIMIZING EDGER SYSTEM

2005 TMT Optimized 2-Saw Edger, 2-60HP Motors, 24” Saw Diameter, SN: 5177, TMT Infeed, SN: 5181.

Inavec Wane Master Edger Optimizer Scanner.

TMT 126”x 16’ 4-Strand C55B Deck W/Electric Drive Into 12’ 3-Slatted Apron Chain Unscrambler W/ 7-Spiral Roll Even Ender into 8’x 15’ 5-Chain Infeed Deck W/Board Tipples Into Edger Infeed.

 

EDGERS

Crosby 72 Combination Edger 3.5 Retech Splined Arbor W/Siemens 350 HP Induction Motor, SN: 32650.

Infeed into Crosby W/Positioners And Tailing Belt.

Corley 48” Overhead Arbor Edger 4-Saw, SN: 69-04-001.

Corley Cant Crowder & Tailor Belt.

 

TRIM SAW

Hemco Series 31 10-Saw Trim Saw, 16’ 8-Strand Infeed W/ Even Ender Rolls, Unscrambler, 8’-Strand Outfeed Deck.

 

AUTOMATED GRADING STATION

Hi Tech Operating System W/Board Flipper, Control Booth & Controls.

 

30-BAY SLING SORTER

USNR 30 Bay Sling Sorter W/ 11’x 180’ 4-Strand HD Loadout Chain.

 

CHIPPER & SAWDUST HANDLING

Fulghum 66” 9-Knife Chipper, Side Infeed, Top Discharge W/Ideal 400 HP 700RPM Induction Motor, SN: 4013-75.

Fulghum 8’x 8’ 2-Deck Vibrator Chip Screen W/Large Cyclone

Fulghum 2’x 60’x 10” Vibratory Conveyor w/5’ Fiberglass Section.

MDI CR85 Metal Detector, SN: 950 505.

Mellott 24”x 10’ Vibratory Conveyor W/Sawdust Drop and 30” Transition.

Approximately 22”x 19” Outlet x 24” Inlet Large Blower W/ Approximately 48” Fan & 100 HP Motor.

Jeffrey Radar 20x20 ESW Feeder, SN: 76677A01.

Rader Large Hopper Bin W/Feeder.

Gardner Denver GDGCEAA High Pressure Blower W/50 HP Motor, SN: S583267.

RDS Rader-Disc Screen, SN: T81-132-RDS.

Kockhums Bark Hog, SN: 36B4603.

24”x 24” Hanging Magnet.

 

TIE TRIM SAW & TIE SORTER

Adjustable Tie Trim 3-saw Trimmer from 8’2”, 8’6”, 10’2” Lengths.

8’-10’ Tie Sorter W/4-Sorting Tables.

 

STEEL BUILDING

Approximately 28’ Length x 28’ Width x 13’ Sidewall Red Iron Steel Building W/ Steel Super Structure.

 

MISC EQUIPMENT

100’s of Feet of Single & Double WD 110 Waste Conveyors up to 160’ Long.

100’s of Feet of Mellott Power Roll Cases, Belt Conveyor, Lumber Decks from 2-7 Strand including Camel Back Roof Top Chain & Jump Transfers.

Many Barn Sweep Conveyors

Catwalk, Stairs, Steel Decking

Scrap Iron

Special & Misc Items

 

FILE ROOM

Armstrong CS Computerized Band Leveler, SN: 20451.

2-Armstrong 5SD JP Stretcher Rolls, SN: 456SDSR-16 & 456SDSR-17.

2-Saw Hammer Benches.

Hanchet Size A230 RH Saw Grinder W/Frequency Drive, SN: 1338.

Hanchet Size A240 LH Saw Grinder W/Frequency Drive, Saw Clamp & Stands, SN: 456.

Hanchet Size A 240 RH Saw Grinder W/Frequency Drive, Saw Clamp & 4-Stands, SN: 331.

Mac Legno Mecomat 391 Saw Leveler, .078 or Smaller, SN: 03630.

2-Iselic Type EBN Band Saw Side Grinders.

Armstrong Tension Gage Grinder.

Hanchet #104 Type C-30 Circle Saw Stretcher, SN: 329.

Wright W-150 HD-A Saw Grinder.

Wright W-350 Super HD Saw Grinder.

Armstrong #54 Hand Sharpener, SN: 7780.

USNR 96 Puck Grinder, Dual Head Space Resurfacer, SN: 100643.

McDonough BDM Guide Block Grinder, SN: 1245.

Hanchet Challenger 60” Knife Grinder, SN: 110.

Electric Babbit Pot.

Miller Syncrowave 180 SD Welder, SN: LF480061L.

Miller Dialarc HF Welder, SN: JF861065.

 

ELECTRICAL

2019 Eaton Amp Guard MV Full Voltage Induction Starter, Medium Voltage.

East Coast Electrical 350 hp Soft Start.

Motortronics Solid State A Motor Control Starter.

Westinghouse 150 HP Soft Start.

Benshaw 150 HP Solid State Soft Start.

Benshaw Solid State 125 hp Soft Start.

Allen Bradley Centerline 600 V 800 Amp Motor Control Center W/ 29-Buckets.

Cutler Hammer Freedom Series 2100 600 Amp Motor Control Center W/ 15-Buckets.

Cutler Hammer Freedom Series 2100 600 Amp Motor Control Center W/ 21-Buckets.

Cutler Hammer Freedom Series 2100 600 Amp 480V Motor Control W/ 18-Buckets

Cutler Hammer Series 2100 Motor Controls.

Cutler Hammer Westinghouse Advantage 600 Amp 480 V Motor Control Center w/ 16-Buckets.

2-Cutler Hammer Unitrol 600 Amp 480 Volt Motor Control Center, 1 W/ 15-Buckets, 1W/ 11-Buckets.

Westinghouse Motor Control Center W/ 22-Buckets.

Westinghouse Motor Control Center W/ 7-Buckets.

Westinghouse Motor Control Center W/ 18-Buckets.

Westinghouse Motor Control Center W/ 17-Buckets.

Cutler Hammer Westinghouse Pow R Line C 48 Volt 2000 Amp Motor Control Main Disconnect W/ Pow R Line Switchboard 2000 Amp W/ 11-Buckets.

Siemens 600 Volt 400 Amp Enclosed HD Main Disconnect.

GE 600 Volt 350 HP Disconnect.

Square DType NYB 3 PH Panel Board W/10-Breakers.

 

YARD EQUIPMENT

Hyster H300XL Forklift, Cab, Diesel Engine, 26,900 Capacity, 183” Lift, Sideshift, Fork Positioners, 12.00 x 20 Front Tires, 8,367 Hours, SN: D019D01750B.

Hyster H300KL Forklift, Cab, LP Gas Engine, 30,000 lb Capacity, 176”Lift, Side Shift, Fork Positioners, 12.00 x 20 Front Tires, 3,042 Hours, SN: D019D002550V.

Flo Cat Earth Seperator, 2-Rock Sort, 1-Soil Sort, 2-Decks, All Electric.

Liebeherr A924 Litronic Loader for Parts, SN: WLHZ067522K0151.

Tandem Axle 14’ Log Yard Trailer, Pintle Hitch, 445/65R22.5 Tires.

Tandem Axle Water Tank Trailer (No Tires Or Rims).

 

AUCTION TERMS & CONDITIONS

All items are sold “As Is Where is” without warranty or guarantee of any kind. All sales are final. A bid is a legal binding contract between you and Associated Auction & Liquidation Co.  All sales are subject to the Michigan State Sales Tax law.

Bidders are encouraged to fully examine all items before bidding. While descriptions are believed to be correct and information was obtained from sources deemed reliable, any information contained in the brochure is in no way a guarantee or warranty expressed or implied. Hour meter and odometer readings published in this listing are not guaranteed, we can only report what is visually seen. Each item in the auction is being sold “As Is Where Is” without warranty or guarantee of any kind, including merchantability or fitness for a particular purpose. Each item is the sole responsibility of purchaser from the moment the item is sold. Announcements made on auction day take precedence over any printed material. The auctioneer reserves the right to group one or more lots into one or more selling lots or to add to or delete from advertised lots.

PAYMENT INFORMATION

Acceptable forms of payments: cash, cashier’s check, wire transfer and personal or company checks accompanied with a current bank letter.  Any other arrangement must be made with Associated Auction & Liquidation Co. prior to auction date.

ONSITE BIDDING

A 10% buyer’s premium  per lot will be added to purchases. A photo ID is required to obtain a bidder number. Settlement must be made in full on day of auction. Any other arrangements must be made with Associated Auction & Liquidation prior to auction date.

ONLINE BIDDING

If you are unable to attend the auction in person, simultaneous internet bidding is available via associatedauction.com A 13% buyer’s premium per lot will be added to internet purchases.

If you are the winning bidder, an invoice will be emailed to you once the auction is completed & reconciled on the day of the auction.  Payment must be made in full by 4PM CST 2 business days following auction date. Any other arrangements must be made with Associated Auction & Liquidation Co. prior to auction date.

REMOVAL

There Will Be Forklift Loading Assistance On Palletized Smaller Items Only. Call Nick LaFord To Schedule An Appointment At 906-202-2933

Saturday, December 5th Until 4PM.

Monday, December 7th - Friday, December 11th By Appointment only between 8AM-4PM.

LODGING

Holiday Inn Express Munising, MI 906-387-4800

Quality Inn Munising, MI 906-661-1010

Americinn Munising, MI 906-387-2000

AIR FLIGHT

Marquette Sawyer Regional Airport Served By Delta And American Airlines

Delta County Airport Escanaba, MI Served By Delta Airlines

 

Wausau Auctioneers
Registered WI Auctioneers: Carl Theorin - #135.
Registered WI Auction #1013-53
4510 County Road L | Merrill, WI 54452
www.WausauAuctioneers.com
715-536-1955 or 800-432-1922

 

Associated Auction & Liquidation Co.
PO Box 147 | Clarksburg, TN 38324
Chuck Lepinski 612-390-1844
www.AssociatedAuction.com