MANISTIQUE, MICHIGAN

FOR SALE

MODERN SAWMILL OPERATION - MOTIVATED SELLER

PRICED TO SELL AT $995,000.00

DEBARKER:

Morbark Mod. 640 log debarker; s/n 1033 w/ Morbark #25, 25’ single chain log infeed & #18, 18’ log outfeed conveyor.

Morbark 3-strand 12’ x 26’ log infeed deck.

Morbark 30 x 16’ log outfeed conveyor w/ ring metal detector.

Morbark #23 24’ single chain log conveyor w/ Mod. 20 TCC dual direction log kickers.

Morbark bark waste conveyor.

4-strand 13’ x 46’ log infeed to carriage.

CLEEREMAN MILL:

Cleereman #40 3-head block carriage; 50’ of track; Silva Tech set works; Cleereman #78 hydraulic feed works; Cleereman Husk w/ 56” blade w/ 24” x 7’ off bearer belt.

Mellott #6 log turner; s/n BEIJ-12.

MCDONOUGH RESAW & MERRY-GO-ROUND:

McDonough SD62A 62” band resaw; s/n 62MA-295/LBR-486.

Elevated Saweyer control booth 8’ x 13’ w/ controls & panels.

4-strand 10½’ x 19’ cant infeed deck from head rig.

30” x 16’ infeed table w/ cant turner; positioneer & spotting chains.

McDonough 43” x 20’ outfeed table w/ dual direction sweepers.

Merry-Go-Round Systems: 4-strand 10’ x 14’ infeed to infeed; 4-strand 10’ x 10’ cut feed back; 2’ x 32’ roll case; 43” x 25’ roll case to trimmer; 4-strand 7’ x 11’ infeed deck to edger from resaw outfeed.

EDGER:

Reckaft Mod. R642 LH combo bull edger w/ hydraulic system & control panel; s/n R642-96-094.

Silva Tech edger set works.

4’ x 9’ infeed table.

3-strand 10’ x 7’ chain jump transfer deck.

10” x 21’ outfeed conveyor belt.

8-strand 20’ x 9’ conveyor deck to vibratory conveyor.

MULTIPLE TRIM SAW & GREEN CHAIN:

CSP Multiple saw trimmer w/ lumber descrambler & control panel.

4-strand 14’ x 20’ transfer deck to trimmer.

CHIPACK & SAWDUST HANDLING VIBRATORY CONVEYORS:

Precision Size 58 6-knive chipper w/ Precision 6x6 shaker screen; cyclone; s/n 5-1998.

Mellott 2’ x 24’ vibratory conveyor to chipper w/ metal detector.

Carrier Mod. SSD-18120-F/S 18” x 50’ vibratory conveyor; s/n 16403.

Cyclone Mod. 45B CWAB sawdust blower; 20 hp w/ dual outlets; s/n 41820.

24” x 6’ shaker screen & blower.

MILL CONVEYORS:

Roll Cases: 2’ x 53’ ; 2’ x 49’; 2’ x 29’.

Belt conveyors; 38” x 34’ ; 2’ x 30’.

2 – BARN SWEEP CONVEYORS:

AIR COMPRESSOR:

Ingersoll Rand Mod. SSR-EP75 75 hp; s/n F11276494346.

Hydraulic power packs to run mill.

DRY KILN & BOILER:

Irvington Moore 35K board foot dry kiln.

Wood fired boiler.

COMPLETED PLANING MILL:

Pinero planer; McDonough resaw; Dieh straight line rip; Mattison moulder; gang saw.

YARD EQUIPMENT:

Caterpillar IT 18B loader.

Knuckleboom yard loader.

Forklifts & more.

REAL ESTATE:

35 +/- Acres Zone: Industrial & Mixed Use Class A Highway; Railroad Siding.

15,000 +/- square foot sawmill building w/ 18’ sidewalls; concrete floor; insulated steel lined; natural gas radiant heat; fully sprinkler. Built in 2003.

6,000 +/- square foot lumber storage building w/ 16’ side walls; concrete floor.

5,600 +/- square foot shop building w/ 16’ side walls; concrete floor insulated & heated.

7,920 +/- square foot planer building w/ 12’ side walls; concrete floor; insulated & heated by boiler.

9,600 +/- lumber storage building w/ open side.

Office Building 9,800 +/- square feet w/ 1,320 +/- square feet office & 8,450 +/- square feet storage.