DAY 2 - KHOURY INC. - FURNITURE MANUFACTURER
1600 W. BREITUNG AVE., KINGSFORD, MI
Wed Sep 15 2010 9:00 AM Central
|
DAY 2
LOCATED: From US Hwy. 2, US Hwy. 41 & M-95 in Iron Mountain, take M-95 south 1Ύ miles to Breitung Ave., then west Ύ mile.
This is a very large auction. It will be necessary to sell with 2 auctioneers simultaneously for a portion of the day. Please come prepared.
On Line Simultaneous Live Bidding will be available through Proxibid.com on major items. An additional 3% Buyers Premium will be charged to successful online bids. Bank Letter must be faxed to our office prior to sale day to be qualified to bid.
CNC MACHINING CENTER:
Weeke/Stiles Optimat BHC 280 3/12; travel capacity; X Axis 130.3; Y Axis 68.3; Z Axis 8.6; 8 tool automatic tool changer; router head; 12 vertical & 6 horizontal spindles; groovers; vacuum table; spindle head cooler; 4 Axis CNC control w/ Wood Wop version 4.7.3 software; CNC control cabinet w/ CRT; 9,631 hours; s/n 0-250-17-0633.
CNC ROUTERS:
Shoda Mod. NC 516.1320; travel capacity; X Axis 51; Y Axis 78; Z Axis 98; vacuum table size 51 x 78.7; 2 vertical router heads; vacuum unit w/ Fanuc 11M 3-axis CNC control & 40KW transformer; s/n 671102.
Morbidelli Author 502 SPA travel capacity; X Axis 100; Y Axis 27.5; Z Axis 7; 27½ x 100 vacuum table w/ 6 holding bars; 2 vacuum heads each; 9 vertical & 1 horizontal routing heads; Morbidelli: 3 axis CNC control w/ CRT; 24,162 hours; s/n AL/3533.
SCMI R-8 overhead pin router; s/n N-500381.
SCMI R9A overhead pin router; 39 x 59 3/8 table; s/n AB-49319.
CNC PANEL SAW:
Giben Model Prismatic 301 SPT 42 x 77 table size; 149 max cutting length; 4.5 max height; 18.5: main blade w/ 25 hp spindle drive; 8.5 scoring blade w/ 3.5 hp spindle drive; rear pusher fence w/ 9 power clamps; auto control for front & back trim cuts; PC controller w/ color monitor; s/n 544-94-80.
TENONERS:
Challoner Medalist Mod. C900PC double end; 96 capacity; 2 tilting trim saws; 4 tenon saws; 2 cope; 2 belt sanders; feed thru chain w/ programmable control; s/n C-900-5205089.
2 Mereen Johnson Mod. 640 double end; 96 capacity; 2 tilting trim saws; 4 tilting trim saws; 4 tilting scoring saw; 4 tenon saws 2 above 2 below; 2 tilting double spindle cope heads w/ AB control; s/n 2808 & s/n 2608.
GLUE CLAMP CARRIERS:
2008 Taylor Mod. 800210 CCM2 dual automatic clamp 60-section; 8 per section; 480 total clamps; s/n W-S-08 w/ Taylor Hydpac 06 hydraulic unit; s/n 00025.
2008 Taylor Mod. 330020; 21-slot 9 Opti-Sizer; s/n OS-293.
2008 Taylor Mod. 30J-M2; 39 wide glue applicator; s/n GA1416.
1996 Taylor Mod. 800-128; 6-section 8 clamps per section; 96 x 32 x 4 pneumatic flatting & power clamping.
WIDE BELT & EDGE SANDER:
Cemco Mod. WBS-473 finish sander; 37: 3-head; 30 hp electric on each head; 2 hp infeed drive; URRF-37-103.
AEM Mod. 75-370 finish sander; 3-head; infeed drive belt; s/n M03531.
Oakley Mod. H6 horizontal edge belt sander; 6 x 36 belt; 5 hp motor.
BORING & DRILLING MACHINES:
Alberti NC Model Format 90/CN point to point drilling machine; 48 x 115 vacuum table; 2 horizontal drill spindles w/ duo opposed tools; 3 vertical router spindles; 2 sets of 8 & 1 set of 10 vertical spindles; 1BM PC control; s/n 3248.
Biesse Forecon 63-57 semi automatic vertical/horizontal boring machine; 60mm panel thickness; 75mm boring depth; 21-horizontal spindles; 2 18-spindles vertical boring heads; spindles on 32mm centers w/ 2 hp 2,800 rpm drive motors; pneumatic infeed w/ adjustable stops; s/n 91-0474.
Vitap ALFA-2T/30707 vertical/horizontal boring machine; 60mm panel thickness; 75mm boring depth; 21-horizontal & 21-horizontal vertical spindles on 32mm centers w/ 2 hp drive motors; pneumatic hold downs; s/n 989669.
Nichols Auto Cleat drilling/boring machine; 4 45o Spindles; incline; 16 wide magazine feeder w/ pneumatic pusher arm.
Richardson Mod. XA-TB vertical boring/drilling machine; 2 3 hp motor belt drive; 5 vertical & 2-sided adjustable drill head; s/n 3211.
Nichols pneumatic drilling machine w/ duo vertical triple spindles; 1 ½ hp drill heads; pneumatic down feed.
Shop Built band feed cleat borer; 2 vertical adjustable 1 hp spindles; 28 x 28 table; 2 pneumatic hold down clamps.
DOVE TAILERS; MORTISERS; AUTOMATIC DRAWER SLIDE MACHINE:
Tyler French drawer front dove tailer; 42 capacity; 2 vertical undermount routers; 2 horizontal back groovers; 2 duo spindle vertical drill heads w/ motors & control.
2002 Macoser/Omec Mod. 750 dove tailer; 2.2KW motor.
2003 Castle Mod. RSM-35 pocket groove mortise; 18 x 15 table; air clamp.
Castle Mod. TP pocket groove mortise; 18 x 15 table; air clamp.
Viking automatic drawer slide machine; left or right hand drawer slides; magazine infeed; 5/16 x 6 x 14 5/8 drawer sliders; dove tails; tenon notchers; pattern cut; groove cuts; 2 belt sander edges w/ controls.
CASE & DRAWER CLAMP:
2004 Uhlig Mod. HP 3000M case clamp; 55 x 112 x 32 capacity; 4 dual pod pressure bars; control panel.
Dodds Mod. C48H horizontal case clamp; 15 x 18 clamp plates; 48 max. Length openings; 8 height adjustment; joy stick control; s/n C92053-217.
2003 Ritter Mod. R200E frame assembly clamp; 450 table; 144 x 60 w/ 2 moveable clamp bars w/ 5 pneumatic clamping cylinders each.
JM Lancaster horizontal case clamp 16 x 90 x 60 max. opening.
2005 Carlson Mod. D122B drawer side clamp; s/n 22948009.
3 Horizontal Case clamps; 16 x 90 clamping plates; 120 max. opening; rotary head wheel manual positioning w/ hydraulic clamp presser.
Euro Guide clamp assembly.
EDGE BANDER:
Holz-Her Mod. 1410; Ύ max. capacity; auto strip & coil feed magazine w/ guillotine; double motor end trim; top & bottom chamfers & buffing; s/n 1287-1986.
MITRE; CHOP & TABLE SAWS:
Newman K-96 double cut mitre saw; s/n 12202.
Pistorius double cut mitre saw; s/n 21630.
Ryobi sliding compound mitre saw.
Hitachi mitre chop saw.
Whirlwind Mod. 1000L popup defect saw.
Industrial RH popup defect saw.
Tannewitz table saw w/ 35 Ύ x 43 table & infeed conveyor.
Rockwell 10 table saw w/ fence.
DeWalt 13 radial arm saw.
MOULDERS:
Weinig Unimat 22A 6-head 8½ x 4.7 capacity w/ EM4 feeder; variable speed feed w/ controls; s/n 222-880-63.
Weinig Unimat 22AL 6-head 8½ x 4.7 capacity w/ EM4 feeder; variable speed feed w/ controls; s/n 222-1303.
Weinig Unimat 17A 6-head; 6.7 x 4.7 cap. variable speed feed w/ controls; s/n 45-3649.
GANG SAWS:
Mereen Johnson 424-DC; gang rip 6 throat; 75 hp notcher; 3 ph variable speed feed; s/n MJ-4171.
Ogam Mod. PO-280 gang rip; 4 3/16 x 11 capacity; 50 hp electric; variable speed feed; s/n 8807-1843.
Diehl Mod. SL52LH-LJ 4 Ό x 8 capacity; 20 throat; 15 hp electric; variable speed feed; s/n 72M-3087-2366.
Oliver Mod. 950 straight line rip saw.
Industrial SLR 424 rip saw; s/n 3-1976.
PLANERS:
Newman Mod. S-282 double roughing planer; Quiet Cut Helical head; 6 x 18 capacity; 40 hp on top; 20 hp on bottom; 20 hp variable speed feed; s/n 14696.
Cantek Mod. C610SA double sided surface planer; Helicl heads; 8 x 24 capacity; 30 hp on top; 25 hp on bottom; 3 hp; variable speed feed; digital thickness DP 525; control & read out.
Power roll infeed table into Cantek.
BAND SAWS:
Stenner VH 36 vertical band resaw; 10 throat; 36 x 35 ½ table; 15KW motor.
Meber 24 vertical band saw w/ power feed; s/n 34708.
3 Delta & Rockwell floor type vertical bands saw.
Central machine WA-14 floor type vertical band saw.
PAINT ROOM & CURING LINE:
JRC 10 x 10 x 40 natural gas convection oven; 400,000 BTU w/ controls.
Conveyor Line: approx. 250 floor type chain w/ 40 30 x 30 carts w/ turntable tops.
3 JRC Cross Draft spray booths Mod. FT-10106; 10 x 10 x 96 w/ filter; lighting 2 hp exhaust fan.
5 Graco drum pumps & agitators.
11 5-gallon paint pots.
7 2½-gallon paint pots.
2 Portable florescent inspection lights.
Plus many spray guns.
OPTIMIZING SAWS:
2 1995 Ultimizer Automatic Optimizing Cutoff Saws: Model 141 Left Hand & Model 142 Right Hand; 2 x 6 capacity; 15 dia saws; 15 hp electric; 8 powered variable speed thru feed conveyor; ULT1 III software vision system; camera & video monitor.
Outfeed System: 6 pneumatic blow off stations; 5 storing stations w/ rubber belt outfeed conveyors.
1995 Gracon Dimter 304 Opticut cut to length optimizing saw; s/n 89257; (Not in Service).
DYSYS GROUP 7 GANG RIP OPTIMIZING SYSTEM:
106 x 20 5-strand C55D rooftop chain deck w/ power roll case reject rolls; board stops w/ 5 scanning cameras & controls.
5-strand 106 x 42 C55D rooftop chain board transfer.
Mellott 18 x 17½ rubber belt conveyor into planer.
BREAKDOWN HOIST:
102 x 32 power roll case infeed deck w/ 2-strand chain lift transfer.
12 wide 3-strand tilt hoist w/ rubber belt sticker conveyor.
104 x 16 5-strand C55 rooftop chain transfer.
BOARD STACKER:
Automated Lumber Handling Inc.:
11 x 28 3-strand infeed deck w/ 4-arm tilt hoist w/ sticker removal conveyors; 11 x 17 6-strand deck to 7-strand board unscrambler; 12 x 21 6-strand H78D rooftop chain sticker deck; 8 x 19 stacking hoist w/ power rolls; 8 x 16 power outfeed roll case to 8 x 16 dead roll outfeed.
56 x 33 2-strand sticker conveyor.
WOOD SCRAP SHEAR SYSTEM & HOG:
1995 Mellott Mod. 140 w/ 20 hp hydraulic power unit; s/n 140054.
Mellott 12 x 20 vibratory waste conveyor w/ electric drive.
Jeffrey Dresser Mod. 45WB wood hog; 125 hp electric; s/n 14215.
American 13C pulverizer; s/n 7404.
DUST COLLECTION:
Carter Day Mod. 124RF10 bag house; 124-bags; 1,580 sq. ft. of cloth; 75 hp blower w/ 25 hp reverse air flow bag cleaning.
Pneumafil Mod. 13.5-445-8 positive pressure bag house; 448-bags; 125 hp & 100 hp blowers; 25 hp reverse air floor bag cleaning; s/n 615-030.
Pneumafil Mod. 13.5 negative pressure bag house 448-bags; 200 hp blower; 25 hp reverse air flow bag cleaning; s/n 664.
21 x 35 steel silo w/ Flying Dutchman unloader.
6 RUBBER BELT CONVEYORS:
New London: 12 x 58; 12 x 50; 12 x 16; 18 x 16; 30 x 15 all w/ electric drives.
Hytroll 11 ½ x 30 3-strand C55D rooftop chain transfer w/ 41 rubber belt.
Mellott 36 x 200 w/ electric drve.
AIR COMPRESSORS & LINE DRYERS & COOLERS:
Ingersoll Rand Mod. LL3-A100 Size 13.5 & 8.25 x 5 reciprocating compressor; 100 hp; s/n L1104D92B.
Ingersoll Rand LL2A7510 12 & 7.25 x 5 reciprocating compressor; 75 hp; s/n L0720D90A.
C-Air 5 hp; 3ph horizontal tank compressor.
Ingersoll Rand TM 600T thermal mass compressed air dryer; 250 PSI; s/n 924TM523.
Ingersoll Rand AF-27 cooler; 285K capacity; s/n 5202.
Ingersoll Rand Thermo Star Mod. TS-150 air line dryer.
Vertical air receiver tank.
TOOL SHARPENING & SHOP EQUIPMENT:
Weinig Rondomat Mod. R-935 grinder/sharpener; s/n 935-405.
Weinig Rondomat Mod. R-931 grinder/sharpener; s/n 1000/2099.
OMA Mod. 970 molder cutting insert gage/setter calibrator; s/n 970-815.
KO Lee surface grinder.
Rusch Mod. 132 drill grinder; s/n 132.
Grizzly Mod. G5960 engine lathe; 17 x 36.
Bridgeport vertical milling machine; s/n J105250.
Rex 6490 pipe threader; s/n 331183.
Cummins C117 floor drill press.
Lincoln Mod. DP-558N floor drill press.
Delta bench model drill press.
Jet JSG-6 disc/belt sander.
Horizontal metal cutting band saw.
Aladin Mod. 1 hot water pressure washer.
Lincoln Idealarc 250 welder.
Hobart Beta Mig 250 wire welder.
2 torch sets w/ carts.
Milwaukee Tools: 2 porta band saws; H.D. hammer drill; Sawzalls; assorted ½ drills.
Waterloo tool chest w/ tools.
Socket sets.
Steel work tables w/ vises.
Plus many more tools.
SPECIAL ITEMS:
Piqua 5 hydraulic cardboard baler.
Sweed Mod. 400 AC banding chopper; s/n 15075.
Lee Mod. XL 3620 2,000# 42 x 42 pneumatic lift tube.
Vacu Lift 3200 hoist; s/n A4476.
2 Aro Ό ton hoists.
Sheen Minigloss 110-20/60 meter.
Scientific Digital sound meter.
Wards 5 hp 2-stage snow blower.
10 Werner fiberglass step ladders; 16 14.
Banding carts & tools.
24 TPI 20 36 floor pedestal fans.
10 wall mount fans.
TOOLING & PARTS & ACCESSORIES:
Large Selection of Tooling For Machines.
New rebuilt 200 hp electric motor.
Electrical; controls; hydraulics; pneumatics; bearings; sheaves; belts.
Parts organizers w/ cap screws; flat socket; nuts; bolts; washers; course & fine thread.
INVENTORY:
Finished Plywood:
60 Ό X 48½ X 96½ RC White Maple.
20 Ύ x 48½ x 96½ RC White Ash.
13 Ύ x 48 ½ x 96 ½ RC-B White Maple.
Quantities of particle board & masonite sheeting.
Cardboard.
Misc. lumber.
PALLET RACKING & WAREHOUSE EQUIPMENT:
40 sections of 42 x 8 pallet racks from 10 14 high.
40 sections of 30 x 10 pallet racks 10 12 high.
4 sections of vertical storage sheeting racks.
Plus 100s of pallet racks in storage.
100s of 2 & 4 wheel platform carts.
Fiberglass tub carts.
Shipping room equipment.
OFFICE EQUIPMENT:
Canon Image Runner 3200 copier.
2 Canon Image Runner 2200 copiers.
13 Dell desk top computers.
8 flat panel monitors.
5 monitors.
H.P. Laser Jet 4100n, 4200n, 5200n printers.
H.P. Desk Jet 960C printer.
5 Oak desk stations w/ overhead storage.
3 wood office desks 2 w/ credenza.
5 steel office desks.
8 wood bookcases.
5 Oak 2-drawer file cabinets.
2-drawer legal file.
Victor 4-drawer legal fire file.
15 4-drawer letter files.
2 4-drawer lateral files.
6 2-drawer lateral files.
10 desk chairs.
4 leather maroon side chars.
6 Office side chairs.
Sentry safe.
3 paper shredders.
Large Formica top cabinet w/ storage.
2 steel 2-door cabinets.
2 Haier water/cooler/dispensers.
Magic Chef refrigerator.
Frigidaire refrigerator.
4 microwave ovens.
2 Bunn coffee makers.
FORKLIFTS & SCISSOR LIFTS:
Hyster Mod. H300XL 30,000# diesel; 183 lift; pneumatic tires; 8 forks; cab; s/n D019D02076T.
Nissan P80 BF03A35V; 8,000# LP gas; 169 lift; side shift; 8.25 x 15 pneumatic tires; 6 forks; 603 hours; s/n BF03-920198.
2 Nissan 40 PH02A20; 4,000#; LP gas; 146 lift; side shift; 7.00 x 12 pneumatic tires; s/n PH02-0203-42 & PH02-9203-41.
Nissan Nomad 30 3,800# LP gas 152 lift; side shift; 6.00 x 9 pneumatic tires; 2,914 hours; s/n APJ01-9T0922.
Clark CY300 30,000# diesel; pneumatic tires; 8 forks; cab; s/n Y183D-16-2159.
Drexel SL 44-3 3,000# electric; 252 lift; s/n 18019-2-53.
Allis Chalmers 645 wheel loader; diesel.
4 Big Joe PDI-20-T11 2,000# walk-behind electric pallet jacks; s/n 316917; 319672; 352629; 352630.
Big Joe PDI 24 T10 2,000# walk-behind electric pallet jack; s/n 341232.
JLG Commander CM-2546 electric scissor lift; s/n 0011438 0200014845.
6 pallet jacks.
Factory Cat. 48 ride on electric sweeper.
Factory Cat. 34 walk-behind electric sweeper.
McKenzie 16 hydra turn snow plow; bucket mount.
PICKUP & VAN:
1998 Chevrolet 2500 Silverado 4x4; extended cab; V-8 gas; auto w/ Boss V snow plow; 156K miles.
2001 Dodge Caravan SE Sport mini van; 3.3L; 181K miles.
TRUCK TRACTORS:
2002 Kenworth W900L tandem axle tractor; 73 high rise sleeper; Cat C15 435 hp; Fuller 13-speed trans.; air ride; 12,000 fronts; 36,000 rears; air slide 5th wheel; leather interior; dual chrome exhaust; 676K miles.
Ford L9000 tandem axle tractor; Cummins Formula diesel; Fuller 9-speed trans.
TOTER TRACTOR:
2000 Sterling A9513 single axle; Cat C12 355 hp; 10-speed; trans.; 137 w.b.; new 5th wheel; 12,000 fronts; 23,000 rears; aluminum dress up kit; 30 x 55 tool boxes; 350K miles.
If you are unable to attend this auction in person, simultaneous internet bidding is available via Proxibid.com. There will be an additional 3% buyers premium added to internet purchases.
ATTENTION BUYERS: Please review these Terms & Conditions. 10% Buyers Premium will be added to purchase price.
TERMS: Payment may be made by Cash or Certified Funds, Visa or Master Cards w/ 4% convenience fee. Personal and Company Checks Must have current Bank Letter guaranteeing payment to Wausau Sales Corp. Any other arrangements must be made with Wausau Sales Corp. prior to sale date. Settlement must be made in full on day of sale and can be made anytime during the sale. No property is to be removed from the premises before making settlement. All items are sold As Is Where Is without warranty or guarantee of any kind. All sales are subject to the state Sales Tax Law. Not responsible for accidents.
CONDITIONS: Bidders are encouraged to fully examine all items before bidding. While descriptions are believed to be correct and information was obtained from sources deemed reliable, any information contained in the brochure is in no way a guarantee or warranty expressed or implied. Each item in the auction is being sold As Is Where Is, without warranty or guarantee of any kind, including merchantability or fitness for purchaser from the moment the item is sold. Announcements made on auction day take precedence over any printed material. The auctioneer reserves the right to group one or more lots into one or more selling lots or to add to or deleted from advertised lots.
AUCTIONEERS: Carl Theorin & Mike Bloedorn
|
|
